The Dahua Technology NKB1000 Network Control Keyboard is the perfect tool to control your network devices. This camera features HDTV capability. It is capable of controlling PTZ dome cameras, DVRs, and network video servers.
When you are ready, you can touch the screen to change directions or touch the bottom edge of the tablet to go home.
You’ll enjoy using the camera more if it’s easier to use. The monochrome LCD display and USB port connect it to SmartPulse Systems.
- Dahua NKB1000 doesn’t appear in the features of the config tool.
- Control Dome Systems, DVRs, and network video server.
- Three-dimensional control of a controller.
- Pattern Control, Preset position, Auto Scan, Auto Pan, and Auto Tour are just some of the things that are available.
- There’s a menu on the screen.
- SmartPSS is aided by the internet.
The Dahua NKB 1000 is not showing up in the Configuration tool.
Table of Contents
The Dahua Nkb1000 wireless camera won’t work with this setup tool. Try several different ways if you’re having trouble getting the Nkb1000 to work properly.
Factory reset is usually required only when there is a software problem, such as when a previous firmware upgrade has caused problems or if your device is new or has If you haven’t upgraded your firmware, it’s time to update.
If you don’t see the result you want from your SEO efforts, you may need to adjust your network settings. Your network settings allow you to make some adjustments to your connection, such as changing what type of network connection you have, how much bandwidth you want, or which devices you want to connect with
When setting up your NKB1000, select “Dahua NKB1000” for the “Wireless Network Type.
What Should Be Done To Get Dahua NKB1000 To show?
There are a number of reasons why the Dahua NKB 1000 isn’t showing up in the setup tool.
That’s correct. The most common explanation is that your Dahua NKB1000 is not properly connected to your PC To make sure you have no loose connections, make sure all the cables are plugged into their connections.
This means that the Dahua NKB1000 isn’t showing up in the Configuration Tool. It could be because your firewall is blocking the configuration tool from accessing the Dahua NKB1000. You can try temporarily turning off your firewall to see if that resolves the issue.
If none of the above methods work, you may need to reset the Dahua NKB1000. You’ll remove all of your customized settings, so make sure to back up all of the information In order to proceed, we need to make sure that the program doesn’t get damaged.
If you still have issues, please contact Dahua customer care.
When trying to get your Dahua NKB1000 up and running, be sure to have an internet connection, as it will be needed to get the device up and Test your networking settings to see if any adjustments will help to resolve the problem.
If your Dahua NKB1000 does not respond after a factory reset, you may want to try to turn it off or perform a full reset. It will clear all settings from your device, so make a backup before proceeding.
How Can You Connect NKB 1000 To a Network?
Prerequisites
NKB1000
Network NVR, DVR, or SD ptz camera
NVR, DVR, or SD’s IP address
Setup Instructions in Steps
- Connect your NKB1000 to a network and power cord. Once booted, the screen should appear like the picture below.
- On the NKB1000, press the Setup button.
- Enter your NKB1000’s password and press Enter.
- Navigate to “Menu Settings” using the joystick and hit “Enter.”
- Type “Zone” and hit “Enter.”
- Enter the following information:
ID: (Any Number) (Any Number)
Name: (Any Number) (Any Number)
SD (PTZ), DVR, or NVR
Link: Internet
IP Address: (The local IP address of your SD, NVR, or DVR)
Port: 37777
Step: (Leave as defaults) (Leave as defaults)
DH-2 is the rule.
admin (or the user name of your NVR)
Password: admin (or the password for your NVR)
- When you press “Enter,” you should see the message “Successful.”
- Keep pressing “ESC” until you reach the Main Menu.
- Choose “Zone Control” and hit “Enter.”
- Enter the ID you made before and hit “Enter.”
- A dialogue box will appear with the words “Connecting.” When finished, your screen should appear like the one below.
- Press the “Cam” button.
- On your NKB1000’s number pad, enter the channel you want to manage.
- Enter “PTZ” and then “Enter”
- If everything went well, your NKB1000’s screen should appear like the one below. The NKB1000 may now be used to control your PTZ.
The configuration tool doesn’t show the search button in dahua nkb 1000.
If the search button in Dahua NVR Config Tool doesn’t show up, then you might have a possible cause of this error could be that the client does not have access to the Amazon Seller Central Administrators must have administrator privileges to use the Config Tool. Another possible cause for this error could be that the Configuration Tool was not properly installed. If the files are corrupted or the installation process is halted, this may occur.
This message indicates that the user does not have the proper permissions and has not installed the configuration tool. You’ll need to have an active firewall and an active DNS server, and you may have to set them up correctly.
Why Isn’t The Camera Shown in The Settings Tool?
There are a number of possible reasons why your camera won’t display in the settings tool.
Another possibility is that your PC is not connected to the Internet. Connecting an IP camera to a computer on a separate network is not recommended. The IP camera might be deactivated because the web interface is inactive. This usually happens when the web browser isn’t set to auto-load. Go to the IP camera’s web interface and activate it under network settings to open the web interface.
Once the web interface is enabled, the IP camera should be visible in the setup tool. Check again. If it’s still not right, make sure you’re using
1. The URL for the setup tool is http:// 2.108:8081
If you are still having trouble with the configuration tool, please contact Dahua support.
- The camera is being added to the NBK1000 1. The type of camera should be set to “SD” if it is a standalone device.
- There are two Click “enter” if you choose “Zone Control.”
- You can enter the ID you made before.
- No extra keyboard keys are necessary to operate the PTZ.
- If the stick is moved but the camera does not move, try again.
How to Locate a Cam on the PC.
There are a few reasons why you can’t locate the camera in settings.
- Ensure that the camera is on the same network as the PC.
- The Config Tool can connect to the network if the computer’s settings are correct.
- If you’re using a router, make sure the setup doesn’t prevent you from accessing the camera.
- The camera as well as the PC should be restarted. Transient network problems can sometimes be overcome with this.
- If you still can’t detect the camera, try manually entering the address into the Config Tool.
It might be that there are a few possible reasons for your Dahua NKB 1000 not showing up in the Setup tool. If you need to get started quickly, make sure the power supply is connected. Then, verify that the network settings are right and that the PC is connected to the same network as the NVR.
In last
Finally, restart both the NVR and the PC. If none of these work, contact Dahua Technical Support. The NKB 1000 is a great backup and recording system for a security camera. If the Bluetooth connection fails sometimes you might not see your printer or other devices in the configuration tool. There might be a variety of reasons why Dahua NKB 1000 support isn’t installed in the configuration file.
The Dahua NKB 1000 is intended to offer a fast and reliable internet connection. The Dahua NKB 1000 is a simple way to connect to your network. It can be hard to get information on the Dahua NKB 1000 from different sources.
